Lumex Stand Assist Patient Transport Review

Hey you! Just a heads up - this post contains links to helpful products that will make your life a heck of a lot better. When you click on a link and make a purchase, my wife and I receive a commission from the seller, at no additional cost to you. It helps compensate us for the expense of running this website and we truly appreciate it! We'd never recommend a product we wouldn't use ourselves, so be glad knowing we've only selected the best for you! Please enjoy our post. We hope it helps!

Lumex Stand Assist Review

Note to Our Readers

This could affect our commission (if you click a link and purchase a product, we may receive some compensation at no additional cost to you), but we think it’s important to be upfront about what products Sarah and I have never personally used for ourselves or our residents. The Lumex Stand Assist Patient Transport Lift is one of these products. The nursing homes we work at use powered lifts exclusively, therefore we’ve never had the opportunity to use a manual lift.  This review is solely based on research and verified customer reviews.

With formalities out of the way, on to the review! 

If you work in the medical profession or if you are the caregiver for an individual or family member with mobility problems you are likely looking at all of the medical devices out there and trying to decide what product will help with transferring. 

You’ve probably spent a lot of time doing research and you’re teying to decide if the Lumex stand assit is the best option for your situation. After all, you want to make sure that you have the best quality products to help the person you’re caring for. 

Since you’re reading this review, you’ve likely narrowed down your list and need a second opinion on the the Lumex stand assist. Or perhaps you’re looking for more information about stand assist patient transport products in general. 

Well, we’re here to help you figure out what you need and how to find the best one. 

If you’re in a hurry…

There’s a good chance you already know what a stand assist lift is and the benefits of using one, so we don’t want to bore you if you’re not interested in reading more about them. The Lumex stand assist patient transport IS a good product and we recommend it. But don’t just take out word for it:

Read what customers have to say.

If you’re interested in learning more about stand assist lifts, keep reading along or if you’d like, skip straight to our Lumex stand assist review.

What is a Stand Assist Patient Transport Lift? 

First, what is a stand assist patient transport device?

Well, we’re talking specifically about a freestanding unit that allows you to help a patient who struggles with mobility. This type of lift is specifically used for patients who are not able to stand or to walk on their own but do have at least limited strength in pulling their own weight and are able to hold themselves in a standing position once there.

This unit is easy to roll directly to the patient and then allows them to help with the process of getting them up and into the unit itself. From there, they can be transported just about anywhere, including the bathroom or to different areas of the building. This is more comfortable as well because they are able to get up and maneuver without caregiver intervention or the need for caregivers to lift or pull the patient. 

How it Does A Stand Assist Lift Work? 

If you’ve never used this type of lift before you may be wondering exactly how it works. If you’ve ever looked at one you can see that they’re actually not as complex as they seem. 

This specific lift is not electric, which means that it doesn’t require a steep learning curve in order for you to start using it safely with your patients. Some customers stated they were even able to use it on their own without any assistance. 

Because it’s entirely manual you can maneuver it easily and you’ll be able to start working with it just about as soon as you receive it.

Let’s take a little closer look at the process and how you can get your patient from one place to another.

  1. Make sure the device is clean and ready for patient use. Check all of the components for wear as well as proper attachment of any accessories to ensure patient safety during use.
  2. Assist the patient (if necessary) into a seated position at the edge of a bed, chair, etc. to prepare for transferring to the unit.
  3. Wheel the transport unit in front of the patient and lock the rear caster wheels to ensure the unit is stable and ready to support patient weight.
  4. Encourage patient to lean forward, gripping the middle bar of the unit with both hands. This will form the support structure for the patient to pull themselves into a standing position.
  5. Patient should put their feet on the platform and use the bar to pull themselves forward, into a standing position. The patient should be able to hold themselves in this standing position while the caregiver adjusts the seat behind them.
  6. Patient can sit on the locked seat and the unit can be wheeled to any location for easy patient transport. When the patient arrives at the location the process can be completed again.
  7. The patient should grip the middle bar again and pull themselves up to a standing position with their feet on the platform. The caregiver can then unlock the seat and move it out of the way.
  8. Once the seat has been moved the patient can lower themselves into a seated position in a chair, bed or anywhere else they are being transported to.
  9. Once the patient is seated in a new location the transport unit can be wheeled out of the way, cleaned and stored until needed again.

This can be repeated as necessary to transport the patient to different areas or to aid in transferring from bed to chair or to a wheelchair or bathroom. 

The stand assist unit is designed to aid the patient and may be used for frequent or infrequent transfer needs. 

Patient Requirements for Stand Assist Use

This type of non-powered unit is not designed for every patient. In fact, there are a number of patients who will not be able to use this type of unit safely. 

Overall, the unit is designed for those patients who have some level of mobility on their own and who are able to provide some support for themselves as well. 

Patients who struggle to sit or to stand will not be able to use this type of device and will instead be required to use an electric or powered stand assist unit, which can provide all levels of support necessary. 

In order to use a non-powered stand assist device patients must be able to complete some important tasks on their own. These abilities must be tested prior to attempting to use the stand assist unit in order to ensure both patient and caregiver safety. 

These requirements include:

  • Pulling their own weight to a standing position, from a sitting position, with support.
  • Lowering themselves to a sitting position, from a standing position, with support.
  • Holding a standing position for a period of 1+ minutes, with support. 
  • Moving the feet and hands with full control of movement and grip.
  • Ability to bend at the hips, knees and ankles in order to raise to a standing position and lower to a seated position. 

When to Use a Non-Powered Stand Assist

If you are considering this type of unit but you’re just not sure you’re going to get enough use out of it let’s take a closer look at the different occasions and situations where you could use this type of assistive device.

In general, as long as the patient is able to support themselves in some ways, this type of assistive device will allow the patient to be transported to or from any location. 

We will take a closer look at some of these types of transfers however.

  • From bed to standard chair. This type of transfer allows the patient to get from their bed at night to a chair that they can sit in during the day and back again. It allows them to feel more comfortable and to participate in normal, daily activities by sitting upright rather than being in a lying position for an extended period. 
  • From bed/standard chair to wheelchair. Patients who are somewhat mobile on their own may also be able to get around in a wheelchair if they can get into and out of the chair. This type of device can aid these patients. Patients who want to be able to move around or travel on their own may want to get into a wheelchair first thing in the morning. They can sit in these for extended periods as well, which makes them even more convenient.
  • From bed/chair to bathroom. Patients who need assistance in getting to the bathroom and being able to use the facilities can benefit from this type of device. It allows the patient to raise and lower themselves but also allows the caregiver the ability to aid with clothing as needed. The patient can then retain a sense of normalcy and comfort through this process. 
  • From bed to chair in a different room. Patients may need or want to be transported from their room to an entirely different room without the aid of a wheelchair. In these cases the patient can use this type of lift to transport them longer distances. 
  • From bed/standard chair to bath. Patients who would like to take a bath or shower will be better able to do so with the aid of this type of device as well as the assistance of a shower chair, which can help the patient to get into the shower more comfortably.

Why Use a Non-Powered (Manual) Stand Assist? 

There are a number of different reasons that you may want to use this type of product with a patient. 

Overall, it’s all about providing support and encouragement for the patient to continue doing much of the work for themselves. 

This helps to encourage the patient to get better and to build up their overall strength. 

It’s also important to support the safety of the caregivers who would otherwise be supporting the patient. 

Let’s go over a few of the most important features and reasons that one of these units might be the best fit for your needs.

  • Provides support for patient movement without the need for caregiver assistance, which decreases the risk of caregiver and patient injury including back injuries.
  • Encourages patient to build up strength and mobility by aiding in their own transfer and providing their own leverage for movement.
  • Safely transfer patient to and from chair, bed, wheelchair, bathroom and other locations.
  • No concern for charging batteries or ensuring caregiver understanding and training of powered options and controls. 
  • Non-powered options can be less expensive compared to powered versions or similar options in a powered format. 

What You Need in a Stand Assist Patient Transports

If you’re looking for a stand assist transport you will want to pay close attention to some very important capabilities of the transport. 

We will go over each of the features that you should be considering and how each of them is going to help you ensure you have the right unit for your patient. 

We will talk about which transport unit we believe is the best option in the next section so you can make sure you provide your patient with the best level of care. 

Keep in mind that not all patient transport devices are designed to offer each of these characteristics and if you choose a different unit you may need to make compromises on some of these features. 

Narrow Size – The first thing you want is a unit that you will be able to get through a standard doorway. Keep in mind that you may be transferring patients from a chair to a bed within the same room or taking them from one room to another. 

Regardless of where you are transporting the patient you need to be able to get the unit through doorways so that it can be taken to different patients and used in different rooms. 

This requires that the unit be smaller than a standard 36” doorway. It shouldn’t be so narrow, however, that a patient cannot sit on it comfortably during the transport process. 

Locking Casters – The casters, at least those on the back wheels, should have locks on them. This ensures patient safety by making sure that the unit will not roll while the patient is pulling themselves onto it or lowering themselves off of it. 

A unit without locking casters would require a caregiver to hold the unit in place, which could be dangerous for the patient as well as the caregiver. 

All four wheels may not lock, however at least the rear wheels should be able to lock into place.

Manual vs. Electric – When it comes to manual units versus electric it’s primarily about the capabilities of the patient themselves. 

Patients who are not able to pull themselves up, hold a standing position or lower themselves down may require an electric unit. 

Those patients who are able to perform these tasks, however, will do much better with a manual unit. On top of this, manual transports are easier to maneuver as well as easier to learn how to use. 

Alongside this they tend to be the less expensive option and have less gizmos that can fail, making them a better investment for smaller facilities or for individuals who need something to care for a loved one at home. 

High Safe Working Load – The safe working load is the amount of weight that the unit can support and still be safe. 

This means that the unit will not break, bend or otherwise warp due to use by patients at or below this weight limit. You want to make sure that the weight limit for the unit that you choose is high enough to accommodate any patients that will be using it. 

You should also be sure that the weight limit is sufficiently higher than the weight of any patient who may be using it to ensure safety. 

Comfortable Seats/Pads – The pads that will provide support and the seat that the patient will be sitting on should be comfortable for them to use. 

While they may not be sitting in the seat for an extended period, a cushion can make it an easier process to transport them and will simply make them feel better about the process as well. 

Support and cushion at the pads will also make it easier for the patient to pull themselves up because these pads will provide a cushion that keeps the legs from hitting too hard while standing. 

High Height Limit – You want to be able to maneuver patients who are least average height and this means looking at the capabilities of the unit you are choosing. 

Most of these types of lifts should be able to accommodate patients who are not only considered ‘average’ height but also considered shorter or taller. 

Height limits that range between 5’1” and 6’0” are generally considered good options because they provide for a range of different patients and ensure safety and comfort. 

Easy to Use – Any unit that you are considering should be easy to use, meaning it should be simple for the patient to get up and down and also easy for the caregiver to maneuver it as well as to lower and raise the seat as needed. 

Ease of use ensures that the patient is able to be transported comfortably and safely without any need for additional support from the caregiver outside of the unit itself. 

Versatility of Use – Choose a unit that can easily be used on different surfaces including hard surface and soft surface flooring. You want something that can roll on at least low level carpeting, however something that can roll on slightly thicker carpeting is also something to consider if you have a space where carpeting is used extensively.

If you are in a home or building with very little carpeting this may not be as big of a concern, however it is definitely something to consider for most uses and especially for those who are going to be using it in their own home where carpeting is more common. 

Price Point – You want something that you can actually afford to provide for your patient. Whether you are looking for a unit that can be used in a medical facility or something that can be used directly in home, you’re going to want it to be easily affordable.

This may mean different things for different individuals, however a moderate price point is generally going to keep you below $1,000 and will allow you the features that you’re looking for and that your patient (and you) require in order to be as safe as possible.  

Lumex Stand Assist Patient Transport Review

Lumex Stand AssistThe Lumex Stand Assist Patient Transport provides support and aid to patients who struggle with mobility but who still have the ability to pull themselves into a standing position and to hold themselves in that position for a transfer.

This particular unit is designed by Graham-Field, a company that produces over 50,000 different items that are used for all aspects of patient care. These items are used in extended care facilities, clinics, hospitals and personal residences, providing safety and security for patients in every area. 

About Graham-Field

Graham-Field produces products under many names including:

  • Everest & Jennings Wheelchairs
  • Lumex Patient Aids and Healthcare Seating
  • Basic American Medical Products Beds and Furnishings
  • Hausted Surgical Stretchers and Chairs
  • John Bunn Respiratory Products
  • Labtron Diagnostic Equipment
  • Grafco Medical-Surgical Products
  • Intensa Medical and Laboratory Furniture
  • Lumiscope Consumer Diagnostics

Each of these companies produces products that are made in the USA, with three manufacturing facilities located in Doraville, Georgia; Warwick, Rhode Island; and Fond-du-Lac, Wisconsin.

There are also distribution facilities located in six different cities throughout the United States to ensure more speedy delivery of products upon order. Considered one of the world’s leading manufacturers of these types of products, Graham-Field ensures the highest quality and best training for all of their team members. 

Lumex Stand Assist Specifications:

Maximum Height: 42.5”

Maximum Width: 25”

Overall Length: 33.5”

Front Base Height: 5”

Unit Weight: 61 lbs.

Safe Working Load: 400 lbs.

Patient Height Minimum: 5’1”

Patient Height Maximum: 6’6”

The Lumex stand assist is a simple to use product that allows patients to be moved from one location to another with ease. It allows patients to utilize their own strength and capabilities to aid in their transfer while helping to provide additional support for caregivers.

With the use of this product there is no need for caregivers to lift or support the patient during a transfer or even in rising to a standing position. Instead, patients are able to bring themselves up to a standing position utilizing the bar across the center of the unit.

This particular unit features relatively narrow-set legs so that it can slide between the legs of most chairs or under a bed while still retaining an adequate level of balance.

The unit likewise has a wide platform that is easy for patients to step onto and stand firmly on while the caregiver lowers the seat behind them.

The bar comes down to provide support at a comfortable level so that the patient does not need to worry about raising their arms too high or leaning forward while supporting themselves with it. 

When the seat has been lowered, a process which takes only moments to accomplish, the patient is able to sit comfortably and still feel secure even while the unit itself is being moved. The seat actually splits into two pieces when it is folded up so that it maintains balance.

When the seat is being lowered it can be brought together and latched to ensure a more secure seat for the patient. This will hold firmly while the patient is seated and being transported but can be taken back apart and folded out again quickly once the patient reaches their end position and needs to be lowered off of the unit. 

What to Look For

Let’s take a little closer look at each of the features that we mentioned were important in choosing a stand assist lift and see just how the Lumex stand assist stacks up. If we’re going to give a little bit of a spoiler, it actually stacks up great compared to the features that we think are the most important and the most useful when it comes to transporting patients within a home environment or a medical facility environment.

We believe that this is the best unit you’re going to find when it comes to manual stand assist devices. You’ll be able to aid the patient and the caregiver at the same time, ensuring better overall levels of care for everyone involved in the health care process. 

Narrow Size – This unit offers a narrow design at 33.5” in total width. This is narrow enough that it can be steered through a standard 36” door. Because it is directed by the caregiver from the front and not the side it is also still safe and comfortable for the caregiver to maneuver and provides enough room on each side to ensure a safer fit for patients being transported as well. 

Locking Casters – The rear wheels of the Lumex stand assist lock in place so that the patient can comfortably and easily pull themselves onto or off of the unit. This provides added security and ensures that the unit remains in place even when not in use. 

Manual Design – The manual design means that there’s no need for additional parts, no batteries and absolutely no learning curve when it comes to figuring out how best to use this unit for patients. It functions entirely by the patient pulling themselves up and the caregiver steering the unit to wherever it needs to go. 

High Safe Working Load – The safe working load for this unit is 400 lbs. This accommodates average size patients as well as most bariatric patients who will need transport while keeping the patient and the caregiver safe. It also ensures that the unit itself is going to be safe and capable of moving these patients for extended periods of time.

Comfortable Seats/Pads – The Lumex stand assist has padding over the knee pads as well as the seat, which makes it more comfortable for the patient to both raise themselves into a standing position and to sit while they are being transported. This also makes it less likely that the patient will develop bumps, bruises and other injuries through the course of use.

High Height Limit – Patients using this particular lift can be anywhere between 5’1” and 6’6” in height and still safely use the unit. This is because of the height of the bar used to pull patients in as well as the height and size of the seat that patients will rest on. Overall, most patients, of varying heights, will be able to use this unit. 

Easy to Use – There is no learning curve for this product because of the way it is designed and the way patients are able to pull themselves into it. Caregivers need only assemble it and be able to fold up or down the seat. From there, there is nothing that needs to be done by the caregiver but to push the unit.

Versatility of Use – The casters for this transport unit are a good size to allow for movement even on carpeted surfaces, which increases the level of versatility for the unit itself and allows the patient to be moved around to even more places. 

Price Point – Priced at around $500, this unit is actually moderately priced and comes in at a rate that most can afford when looking to supply medical facilities or to care for less mobile individuals in their own home. The price point makes it a convenience for many and allows for increased use. 

Product Features:

  • Split seat folds out while patient stands 
  • Four wheel design improves movement
  • Rear wheel locking casters
  • Narrow design fits through doorways
  • 400 lbs. safe working load
What We Like What We Don't
Split seat for easy patient movement

Locking rear casters to improve safety

Padded knee pads for added comfort

Easy maneuvering through doorways

Affordable price point for most caregivers

Comfortable bar placement for patient support

Simple to use design for patient and caregiver

Versatile for more mobile patients

Encourages patient engagement and improvement

Easy assembly process to start using immediately
Legs are not adjustable to fit around larger chairs

Not ideal for shorter patients

Not designed to aid in lifting from the floor

Not designed to aid in maneuvering to or from very low surfaces

Requires patient to provide support

Not ideal for transport over carpet

Final Thoughts About The Lumex Stand Assist

Overall, this is one of the best units available if you need a non-powered stand assist device. It’s designed to provide the support patients need in order to get from one location to another and encourages them to aid themselves in the process.

The Lumex stand assist is a high quality product that improves the quality of care patients are able to receive while also reducing the amount of strain or risk of injury to caregivers, especially related to back injuries.

Patients are able to improve their strength and work on getting even more mobility and freedom, even to stay in their own homes. 

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.